Heatrae Sadia Megaflo Fault chart

Unvented Cylinders Megaflo Common Faults:

On the left is the extract from the instruction book supplied with your Megaflo. 

However, the table is pretty basic, so here's a short list of faults that aren't listed.

 

  • Hot water is hot enough, but runs out quickly.
  • Hot water comes out of the cold taps occasionally
  • Hot taps all work fine, but shower valves are luke warm
  • Lower pressure as you get higher in the property
  • Economy 7 (off peak) not working, but boost (on peak) is working ok.
  • Leaking/dripping CWCV
  • Constant discharge through tundish, or when cylinder gets hot

 


All the faults listed will require a repair call. They are not DIY fixes.

Please remember these systems can be volatile, and you need to be qualified to carry out repairs and installations.


To Book A Repair Call:


Call at Megaflo-service.co.uk


0207 064 6777

Call Us